ELEVTRDMBWT-Q Elevator, Dumbwaiter - Quarterly

                                                           Man Hours 3.75
Special Instructions:

1.  Review manufacturer's Instructions.

Items to Check & Initial Completion:

1. ___ Inspect and clean hoistway.  Remove trash from pit.
2. ___ Examine sheaves, cable, counterweight, etc.  Look for loose bolts,
       misalignment, weak or improper cable fasteners, etc.  Make safety or
       reliability tests if anything questionable is found.
3. ___ Examine car for structural features, appearance, need for attention,
       surface condition, condition of paint, etc.
4. ___ On hand powered units, examine cable pulls for loose strands, sharp edges,
       rough surfaces, or other potential hazards.
5. ___ Inspect power unit, motor controls, and all accessories.
6. ___ Check all indicators, lights, bull's-eyes, controls, safety devices, etc.
7. ___ Check door gate and interlocks.
8. ___ Comply with lubrication schedule.
9. ___ Check operating voltage and running amps of hoist motor.
10.___ Verify that safety devices are operating properly before
       putting dumbwaiter back in service.
11.___ Clean up and remove all debris.

Tools & Materials:

1.  Standard Tool kit.
    Plus  Insulated pliers and screwdrivers
          Wire strippers
          Wire crimpers
          Voltmeter - Ohmmeter - Milliammeter
          Clamp on meter(volt - ohm - amp meter)
          Soldering kit
          1/8" 25' fish tape
          Burnishing tool
2.  Lubricants.  Consult the Material Safety Data Sheets (MSDS) for hazardous
    ingredients and proper personal protective equipment (PPE).
3.  Safety signs

Table of Contents    |    Next