PAPERBALER-A Paper Baler - Annual

                                                      Man Hours 3
Special Instructions:

1.  Review manufacturer's instructions.
2.  Open and tag electric switches.


Items to Check & Initial Completion:

1.___ Dust or wipe clean all parts of machine.  Examine structural features.
2.___ Blow out electric motor.  Inspect starter, controls, push button, upper and
      lower limit switch, etc.  Clean and adjust as required.
3.___ Check drive unit, mechanical features, and all moving parts.
4.___ Comply with lubrication schedule.
5.___ Adjust operating mechanism.
6.___ Clean up work area.


Tools & Materials:

1.  Standard Tool Kit
    Plus  Insulated pliers and screwdrivers
          Wire strippers
          Wire crimpers
          Voltmeter - Ohmmeter - Milliammeter
          Clamp on meter(volt - ohm - amp meter)
          Soldering kit
          1/8" 25' fish tape
          Burnishing tool
2.  Lubricants.  Consult the Material Safety Data Sheets (MSDS) for hazardous
    ingredients and proper personal protective equipment (PPE).

Table of Contents    |    Next